Preparing The Network And Host Computer; Checking The Printer's Network Connection; Creating A Shared Folder - Seiko SII Teriostar LP-1030-MF User Manual

Preparing the network and host computer

Chapter
1
‹ Checking the Printer's Network Connection
Chapter
2
Chapter
3
‹ Creating a Shared Folder
Chapter
4
Chapter
5
Chapter
6
62
LP-1030-MF User's Manual for Multifunction Printer Operation
Before operating submission functions, check your printer's network connection
and the shared folder on the host computer.
Check that the IP address, subnet mask, and gateway address of the Printer are
set correctly. For more details, see the
Basic Printer Operation.
On the host computer, create a shared folder to which you will send the image
data.
Note
Assign write permission to the shared folder.
‹
You are recommended to install the host computer on the same LAN as the
‹
Printer to:
- Minimize the Printer's operation time decrease caused by the scanned
data transmission delay; and
- Prevent the scanned data leakage.
Chapter 3
in the separate
User's Manual for