Checking Operating Status With Message; Waiting For Scan Request; Set The Original - Seiko SII Teriostar LP-1030-MF User Manual

Checking Operating Status with Message

Chapter
1
‹ Waiting for Scan Request
Chapter
2
Chapter
3
Chapter
4
Chapter
5
‹ Set the Original
Chapter
6
92
LP-1030-MF User's Manual for Multifunction Printer Operation
During the scan operation, you can check the operating statuses with the message
on the screen. There are seven types of status screen.
Press SCAN to show the screen below. This screen shows that the Printer is waiting
for the request from the computer connected to the same network.
A message, Waiting for Scan Request appears on the screen.
When the Printer is connected to a computer and when it receives the scan request
from the computer, the message changes to Load the original.
After the message appears, load the original.
To cancel the connection with the computer, press Cancel on the screen before
loading the original.