Saving Settings As Default Settings - Seiko SII Teriostar LP-1030-MF User Manual

Saving Settings as Default Settings

You can register the frequently used settings and complicated settings as the
Printer's default settings instead of preset, so that the Printer returns to the settings
after:
- The Printer powered on;
- The Printer reset; or
- The operation mode changed.
You are recommended to register the Printer settings as default, with which you
always operate the Printer.
Settings can be saved as default settings for the following modes.
- Copy mode
- Digital sorting mode
- Image submission
- Submission box
- Printer submission
The procedure is as follows.
(1) Press Preset to display the preset screen on the touchpanel.
(2) Press Set as Default.
Then the current copy/submission settings are saved as default settings.
Note
Note that default settings does not include the submission destination
‹
setting.
LP-1030-MF User's Manual for Multifunction Printer Operation
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
87