Table of Contents
Advertisement
Configuring the
Step one: Log in to the web interface
1
In a web browser, navigate to the IP address of the ISDN GW 3241.
2
Click
.
Log in
3
Type
in the username field and leave the password field blank.
admin
4
Click
.
OK
The
Login information page
We recommend that you change the admin account to use a password as
i
soon as possible. Click
page, or go to
Step two: Set up the ISDN interface
To define the ISDN interface type for the ISDN GW 3241, go to
the ISDN GW 3241 web interface. For assistance click the help button for the page.
Leave the advanced settings unchanged unless you have specific configuration
requirements.
Step three: Configure the ISDN ports
To configure the ISDN ports on the ISDN GW 3241, go to
and specify the appropriate values for each port. For assistance click the help button
for the page.
Step four: Configure call control
To define a SIP proxy for call control/address resolution, go to
use an H.323 gatekeeper, go to
help button for the page.
Step five: Configure the dial plan
By default the ISDN GW 3241 rejects all calls. To enable calling with the ISDN GW
3241 you must configure a dial plan with at least one dial plan rule for each direction
in which you want calls to be accepted (IP to ISDN and/or ISDN to IP).
ISDN GW 3241
is displayed.
Change password
and click the
Users
Settings > H.323
Configuring the ISDN GW 3241
on the
Login information
user ID.
admin
Settings > ISDN ports
instead. For assistance click the
Settings > ISDN
. If you
Settings > SIP
in
11
Advertisement
Table of Contents
