Sound Mode Selection - Jabra Netcom GN 9330 Additional Functions

is ideal for most users. However, if you experience interference from other communication
devices during your calls, you may want to switch to the Low or Very Low modes. Changing to
Low or Very Low power modes will reduce the range of your headset.
Power mode
Normal
Low
Very Low (V. low)
* In typical offi ce environment
Note: The Normal power mode is the default setting.
To change the range/power mode:
3 4
1. Use to locate the range/power mode menu
5 6
2. Use to select one of the 3 modes from the menu.
3. Press OK to confi rm the new mode.

2.5.4 Sound mode selection

This menu is split into two sections: "Treble/Normal/Bass" and "Fixed/Switch". These two
sections are separated by a blank line. It is possible to choose one mode in each of the two
sections.
Your headset offers 3 treble/bass modes (Treble, Normal and Bass). You can change these to
suit your personal preferences or needs, and seperately determine the USB sound quality.
Sound mode
Treble
Normal
Bass
Note: The Normal mode is the default setting.
Sound mode
Fixed
Switch
Range* DECT
Up to 100 m
Up to 50 m
Up to 20 m
Effect
Accentuates high tones
Accentuates all tones evenly
Accentuates lower tones
Effect
Speech quality in headset loudspeaker as known
from traditional telephones (narrowband)
Automatically switches between wideband or
narrowband sound quality. In conference call
mode, automatic switching is disabled.
Range* US DECT
Up to 300 ft
Up to 150 ft
Up to 60 ft
on base display.
Benefi ts
Ideal for users with slight high-
frequency hearing loss
Ideal for all users
Ideal for users preferring a bass-
rich sound
Benefi ts
Improved talk time in USB mode
Enhanced USB sound quality
7