Receiving a call/AutoTalk set to OFF
Handset is in the cradle
1) Remove the handset from the
charging cradle.
2) Flip the top panel up.
3) Press talk/flash.
Hanging Up
Press end or close the top panel.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press
handset. To switch from a speakerphone call to a normal call, press
phone).
Moving out of range
If you move your handset farther from the base unit during a call, you might start
to hear more noise than usual. If you go too far from the base, you'll hear a beep
and see
No Si gn a l P re s s H EL P
caller for another 35 seconds, so you can move back within range to return to the
call.
[ 3 5 ] U s in g Y o ur P ho n e
Handset is off the cradle
1) Flip the top panel up.
2) Press talk/flash.
on the display. The base will stay connected to the
(speaker phone) on the
(speaker
note
•If Open to Answer is
ON, the phone will
automatically answer
the call when you flip
the top panel up (see
page 22 for setting).
•If Any Key Answer is
set to On, you can also
press any number key
on the keypad to
answer a call (see page
22 for setting).
•While using the
handset speaker phone
or a headset, closing
the top panel will not
hang up the call.
•To scroll through the
help, press the >>|
soft key or right key.
w w w . u n i d e n . c o m