Register The Elx500 Expansion Handset To The Main Base - Uniden ELT 560 series Owner's Manual

Register the ELX500 expansion handset to the main base

Before the expansion handset is registered, the battery pack MUST be charged for 10
hours.
To register an ELX500 handset, simply place it in the main base.
While the handset is registering,
R egistration complet e.
R e gi s tr a ti on fa i le d .
To register a TCX860 handset, follow the steps below:
1) Remove the battery compartment cover from the back of
the main base.
2) Press and hold the
compartment.
3) Keep pressing the
handset charge LED on main base start to blink.
4) On the handset, press and hold # until you hear a beep.
While the handset is registering,
R egistration complet e.
R e gi s tr a ti on fa i le d .
[ 1 3 ] E x pa nd in g Y ou r P ho n e
Ha n ds e t R eg i st er i ng
is displayed, the handset has been registered to the base. If
appears, please try these steps again.
button in the battery
Registration
button until the
Registration
Ha n ds e t R eg i st er i ng
is displayed, the handset has been registered to the base. If
appears, please try these steps again.
will appear in the LCD. When
Registration
button
will appear in the LCD. When
w w w . u n i d e n . c o m