Changing The Digital Security Code; Installing The Holster - Uniden ELT 560 series Owner's Manual

Changing the Digital Security Code

note

Installing the Holster

You must remove the
holster to charge the
handset.
w w w . u n i d e n . c o m
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:
1. Perform the "System Reset" options ("De-register the Handset" and "Replacing
the Base Setting") for all the handsets you have (see page 63).
2. Re-register each handset by following the steps on page 12.
- Line up the groove on the back of the handset with the groove
on the holster. The handset fits in the holster only one way.
- Slide the phone into the holster.
- Use the spring clip to attach the holster to your belt or
pocket.
C h a ng i ng t he D i gi t a l S e c u r i t y C o d e [ 1 4 ]