Power Lumbar; Heated Seats - GMC Acadia 15919282 Owner's Manual

Power Lumbar

If the seats have power lumbar, the
controls used to operate this
feature are located on the outboard
side of the seats. See "Power
Lumbar" under Power Seats on
page 1-4 for more information.
To increase or decrease lumbar
support, press and hold the front or
rear of the control (C).
Release the control when the
seatback reaches the desired level
of lumbar support.
The lumbar support may need to be
adjusted when changing the
seating position.

Heated Seats

On vehicles with heated front seats,
the controls are located on the center
console. To operate the heated seats
the engine must be running.
I
(Heated Seatback): Press to
turn on the heated seatback.
J
(Heated Seat and Seatback):
Press to turn on or off the heated
seat and seatback.
The light on the button will come on
to indicate that the feature is on.
Each time the button is pressed, the
temperature settings change from
high, to medium, to low, to off.
Indicator lights above the button will
show the level of heat selected: three
for high, two for medium, and one
for low.
Seats and Restraint System
The passenger seat may take
longer to heat up.
If the vehicle has remote vehicle
start and is started using the remote
keyless entry transmitter, the front
heated seats will be turned on to the
high setting if it is cold outside.
See "Remote Vehicle Start" under
Remote Keyless Entry (RKE)
System Operation on page 2-4.
When the ignition is turned on, the
heated seat feature will turn off.
To turn the heated seat feature back
on, press the desired button.
1-5