Operating Problems - AEG LAVAMAT BELLA 1480 User Manual

User information

Operating problems

Many checks have been carried out during the manufacture of your
washing machine. However, if you face a problem with its operation,
please read the following sections before calling the After Sales
service.
Symptom
The washing machine will
not start or will not fill
The washing machine fills
up but empties again
immediately
The washing machine will
not spin or will not empty
26
Cause
• the washing machine is not correctly
connected, the electrical installation is
not working,
• the cover of your washing machine
and the drum flaps are not correctly
closed,
• you did not control the programme
start correctly,
• there is a power failure,
• the water supply is closed off,
• the water tap is closed,
• the water inlet is blocked.
• the drain siphon is attached too low
(see installation section).
• the drain pipe is blocked or kinked,
• the drain filter is blocked,
• the anti-unbalance mass safety device
has tripped; bad distribution of
washing in the drum,
• the «Drain» programme or the «Rinse
hold» option is selected,
• the height of the drain siphon is
wrong.