Opening The Cover While The Appliance Is Operating; Action During A Programme - AEG LAVAMAT BELLA 1480 User Manual

Opening the cover while the appliance is operating

The COVER and START/PAUSE indicators
show whether the cover can be opened :
COVER
light
Illuminated Flashing red
green
Illuminated Illuminated red
green
Illuminated Flashing
red illuminated red
If:
- the END OF CYCLE (Ende) light is flashing,
- and/or the error code E40 appears in the display window,
this indicates that you have tried to start a washing programme
without properly closing the cover. If this happens, press the cover
down firmly and restart the washing programme.

Action during a programme

Adding of laundry
Press the «Start/Pause» pushbutton : the corresponding light flashes
as long as the programme is paused. You will then hear a double
«click» in the locking device when the cover opens. Press the same
pushbutton again to resume the programme.
For reasons of safety, you can not open the lid if the temperature of
the washing water is too high.
Modifying the current programme
Before modifying the current programme, you must put the washing
machine to pause by pressing on the «Start/Pause» pushbutton. If it is
impossible to make the modification, the corresponding light flashes
for few seconds. If you decide to change the programme in any case,
you will need to cancel the current programme (see below).
START/PAUSE
light
Yes, once cover lock has
been released
Yes, after pressing the
START/PAUSE button
red or No
User information
Can cover
be opened?
15