User's instructions
9. Operating problems
Many checks have been carried out during the manufacture of your
washing machine. However, if you face a problem with its operation,
please read the following sections before calling the After Sales servi-
ce.
Symptom
The washing machine will
not start or will not fill:
The washing machine fills
up but empties again im-
mediately:
The washing machine fills,
then the programme knob
advances quickly to the
end of the cycle and the
machine drains or the wash
does not take place:
The washing machine will
not spin or will not empty:
22
Cause
• the washing machine is not correctly
connected, the electrical installation is
not working,
• the lid of your washing machine and
the drum flaps are not correctly
closed,
• you did not control the program start
correctly,
• there is a power failure,
• the water supply is closed off,
• the water tap is closed,
• the water inlet is blocked.
• the drain siphon is attached too low
(see installation section).
• the drum doors are not closed cor-
rectly.
• the drain pipe is blocked or kinked,
• the drain filter is blocked,
• the «Drain» program or the «Rinse
*
hold»
option is selected,
• the height of the drain siphon is
wrong.