Table of Contents
Advertisement
Help
74
Handset not registering
Check that the base is plugged into the mains power and switched on.
I
Check that the handset battery is fully charged and fitted correctly.
I
Forgotten your PIN number
Try entering the default PIN = 0000. If you have changed the number and cannot
I
remember it, contact the BT Zenith Flip Helpline on 0870 605 8047.
No display
Check that the handset battery is charged. If necessary, replace the battery.
I
No connection between handset and base
You may be out of range of the base. Move closer.
I
Handset on the base does not charge
Maximum charging power is only possible when no calls are being made.
I
Make sure the handset is placed properly on the base. When charging, the battery
I
symbol is animated, see pages 9 –10.
Handset does not ring
Check that the battery is inserted correctly.
I
Check that the handset ringer has not been switched off, see page 61.
I
If you experience any problems, please call the Helpline on 0870 605 8047
Advertisement
Table of Contents
