Miscellaneous Printout Problems - Epson PictureMate 100 Manual

Miscellaneous Printout Problems

The printer prints blank pages.
The print head may need cleaning. See "Cleaning the
Print Head" on page 40.
The borders or layout are incorrect.
❏
Check your Layout setting to see if it is correct.
See "Basic Photo Printing" on page 16.
❏
If you have a border on one side of your photo but
not the other, make sure the paper is positioned
correctly in the paper support, all the way to the
right. Slide the edge guide against the paper.
❏
If the subject of your photo is very close to the
edge of the image, you may want to select Border
as the Layout setting. This prevents the automatic
enlargement of your photo (to eliminate the
borders) which may be causing part of your image
to be cut off.
The wrong photo is printed.
❏
If your camera supports DPOF, you can pre-select
photos so PictureMate will print only the ones
you want. See "Printing Camera-Selected DPOF
Photos" on page 17.
❏
If your camera is PictBridge- or USB DP-enabled,
you can connect it to PictureMate and control
printing from your camera. See "Printing From a
PictBridge-Enabled Camera" on page 25.
47
Troubleshooting