Cleaning Picturemate - Epson PictureMate 100 Manual

Cleaning PictureMate

To keep PictureMate operating at its best, clean it
thoroughly several times a year as follows.
1. Turn off PictureMate and unplug the power cord.
2. Remove any paper from the paper support.
3. Use a soft brush to carefully clean away all dust
and dirt from the paper support.
4. If the outer case or the inside of the paper support
is dirty, wipe it with a soft, clean cloth dampened
with mild detergent. Keep the output tray closed
to prevent water from getting inside.
42
Maintaining PictureMate
Caution:
c
❏
Never use alcohol or thinner to clean the
printer, as these chemicals can damage the
components as well as the case.
❏
Be careful not to get water on the printer
mechanism or electronic components.
❏
Do not use a hard or abrasive brush.
❏
Do not spray the inside of the printer with
lubricants. Unsuitable oils can damage the
mechanism. Contact your dealer or a qualified
service person if lubrication is needed.