Printer Power Problems - Epson PictureMate PM 240 Manual

Error Messages
Error in data. Printouts
may be affected.
The image is too large.
See your printer
documentation.
The image is too complex.
See your printer
documentation.
Cannot recognize the
external device. See your
printer documentation.
Cannot recognize the
memory card. See your
printer documentation.
The battery is empty.
Battery overheating.
The battery voltage is
abnormal.
Cannot recognize CD
contents. See your printer
documentation.
70
Troubleshooting
Solution
The print results may not be perfect.
Check the data.
Press the OK button to clear the error.
Check the data.
Disconnect the device and check that it
meets the PictureMate specifications.
Make sure the memory card has been
inserted correctly. If so, check to see if
there is a problem with the card and try
again.
Connect the AC adapter.
Turn the PictureMate off, and wait until
the battery temperature decreases.
Turn the PictureMate off. Replace the
battery with a new one.
Remove the CD from the CD drive and
check your CD is compatible with this
printer.
PictureMate PM 240 / PM 280

Printer Power Problems

LCD screen is off
❏
Press the d On button to make sure that
PictureMate is on.
❏
Turn off PictureMate and make sure that the
power cord is securely plugged in.
❏
Make sure that your outlet works and is not
controlled by a wall switch or timer.
LCD screen came on and then went out
The PictureMate's voltage may not match the outlet
rating. Turn off PictureMate and unplug it immediately.
Then, check the printer labels.
Caution:
c
If the voltage does not match, DO NOT PLUG
YOUR PRINTER BACK IN. Contact your
dealer.