Using Additional Handsets And Bases - BT FREELANCE XD500 User Manual

Using additional handsets
and bases
Up to 5 handsets can be
registered and operated from any
one Freelance XD 500 base. This
allows you to make internal calls
between two handsets while a
third is making an external call.
Each handset can be registered
on up to 4 bases.
Each additional handset you
purchase must be registered with
the base. (If you have purchased
Twin/Trio/Quad, these will already
be pre-registered.)
Your handset supplied is
pre-registered as Handset 1 to its
base ( ).
Remember to charge batteries
of new handsets for at least 16
hours before use.
If the display shows NOT REG and
the symbol is flashing, your
handset is not yet registered with
the base.
To register a handset to
another base
At the base:
Press and hold the base
button for at least
10 seconds, until you hear
the validation tone (two
beeps), then release the
button.
At the handset:
Press the
enter the menu.
Use the
to scroll to REGISTER and
press the
button to
button
button.