Call Screening - BT FREELANCE XD500 User Manual

To delete all messages
When all messages have
been played the prompt
will announce, "End of
messages. To delete all
messages, press delete".
The display counts down
from 8-0.
During the countdown
press the red
button and the prompt will
announce, "All messages
deleted". At the end of the
countdown there will be a
confirmation tone.
To cancel deletion
Press the
during the 8-0 countdown.
All messages will be saved
including any marked for
deletion.
You can let your answering machine
pick up a call, even if you are in.
This allows you to identify the
caller and decide whether to take
the call.
Make sure the volume on the
base unit is set to an audible level,
see page 35. Allow the incoming
call to be answered by your
Freelance XD 500 answering
machine as normal. You will hear
the caller begin to leave a message.
button

Call screening

To screen a call from the
base unit
While listening to your
caller leaving a message,
via the base unit
loudspeaker, you can
decide to take the call by
pressing the
on the handset.
Or
If the handset is resting
on the base unit and you
decide to take the call, lift
the handset and speak to
the caller. Recording will
stop automatically.
button