Remote Access - BT FREELANCE XD500 User Manual

Remote access

You can turn your Freelance XD
500 answering machine on and off
and listen to your messages from
any Touchtone
TM
To protect your privacy, messages
can only be accessed by entering
a 3-digit security code.
The pre-set code is 000 and can be
changed. If you change the code it
is advisable that you make a note
of it somewhere safe.
To change your security
PIN code
Press the
Press the
To set a new security PIN
code press
You will hear a beep,
followed by, "Please enter
new security code after the
tone".
Enter a 3-digit code of
your choice.
The prompt will announce
the new security PIN code.
telephone.
button twice.
button.
✱
.
To confirm your security
code press .
Press and hold the
button to return to
standby.
After 15 seconds the handset will
automatically return to standby.
To switch your answering
machine on remotely
If you go out and forget
to turn your answering
machine on you can switch
it on remotely.
Dial your telephone
number.
Let the phone ring for 20
rings until you hear your
outgoing message.
Press the
Enter your security code.
✱
button.