Setting Up - BT FREELANCE XD500 User Manual

Setting up

Situate your product close enough
to the telephone and mains power
supply so that the cables will reach.
Make sure it is at least 1 metre
away from other electrical products
to avoid interference.
Plug the power supply
cable into the power socket
on your Freelance XD 500
base. The green Power/In
Use light comes on.
Your Freelance XD 500
will announce the default
settings of the answering
machine. See page 17.
The base station must
be plugged into the
mains power socket at
all times.
Do not connect the
telephone line cord to the
phone socket until your
handset is fully charged.
This will prevent the risk
of the phone being
answered before the
batteries are charged.
Answering the phone
before the batteries are
fully charged may prevent
it from reaching its
optimum capacity.