BT DIVERSE 1010 User Manual page 19

To set your handset for automatic base
selection
If you are moving around, and likely to lose
contact with your base unit, your handset
can be automatically switch to the first
available base unit. If this is set and you are
in the area where the signals of two base
units are overlapping, your handset will
select the strongest signal.
The handset must be switched
STO
• Press the
• Press the
numbers of the base stations at which
the handset is registered.
• Press the
selection.
• Press the
The handset will now select the base
unit offering the strongest signal.
Display will show the base unit selected
(unless de-activated. See page 33 to
set/clear the display of the base unit
number on a handset).
You can change automatic registration at a
base unit to manual registration. So if you are
in an area where the range of two base units
overlap, you can specify which base unit (and
which outgoing line) you prefer to use.
34
INT
button.
STO
button. Display shows the
INT
button to set automatic
0
button to confirm.
STO
ON