Cleaning The Drum; Clean Operating Screen And Housing; What To Do If; Troubleshooting By Yourself - Electrolux EDC 5371 User Information

Cleaning the drum

1
Caution! Do not use abrasives or steel wool to
clean the drum.
3
Lime in the water or cleaning agents may form
a barely visible lining on the inside of the drum.
The degree to which the laundry has been
dried is then no longer detected reliably. The
laundry is damper than expected when re-
moved from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based
cleaner) to wipe down the inside of the drum and
drum ribs.

What to do if ...

Troubleshooting by yourself

If, during operation, the error code (E plus number or
letter) appears on the multi-display: Switch the ma-
chine off and on again. Reset programme. Press the
START/PAUSE button
Problem
Dryer does not work.
Drying results unsatisfactory.
Loading door does not open
with DOOR (TÜR) button.
Possible cause
Mains plug is not plugged in or fuse
is not working correctly.
Loading door is open.
Have you pressed the START/
PAUSE button?
Wrong programme selected.
Lint filter clogged.
Heat exchanger clogged with lint.
Incorrect volume of laundry.
Ventilation slots in base area cov-
ered up.
Residue on inside surface of drum or
drum ribs.
Mains plug disconnected.
Programme selector in OFF (AUS)
position.
Clean operating screen and
housing
1
Caution! Do not use furniture cleaners or ag-
gressive cleaning agents to clean the ma-
chine.
Use a damp cloth to wipe down the operating screen
and housing.
If the error is still displayed, please inform our after-
sales service and quote the error code.
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Close loading door.
Press the START/PAUSE button again.
Select a different programme the next
time you dry (see "Overview of pro-
grammes" section).
Clean lint filter.
Clean heat exchanger.
Observe recommended loading vol-
umes.
Uncover ventilation slots in base area.
Clean inside surface of drum and drum
ribs.
Make an adjustment using the INTEN-
SITY (RESTFEUCHTE) function (see
chapter "Drying, Selecting additional
functions").
Plug in at mains socket.
Set programme. Loading door can be
opened at any time by exerting pres-
sure on the door.
Remedy
17