Yamaha Venture XVZ1300TF Owner's Manual page 53

AUDIO SYSTEM
3. Push either side of the up/down
switch once for 1 second or more
to tune in a station automatically.
4. Repeatedly push either side of the
up/down switch for less than
1 second until the desired preset
number ("1" through "6") is dis-
played.
5. Push the "SELECT" button once
for less than 1 second to store the
4
radio station selected in step 3 un-
der the preset number selected in
step 4.
6. Repeat this procedure to preset
other radio stations.
Programing preset radio stations
automatically
Up to 6 stations can be programmed
automatically for each frequency band
(FM1, FM2, FM3, and AM) as follows.
NOTE:
@
This function works best in areas with
strong radio signals.
@
1. Select a frequency band. (See
page 4-12.)
2. Push the "SELECT" button once
for 2 seconds or more. The radio
frequency and preset station num-
ber "1" (to the right of "CH.") start
flashing.
4-15
3. Repeatedly push either side of the
up/down switch for less than
1 second until "A" (automatic) ap-
pears in the display.
4. Push the "SELECT" button once
for less than 1 second to program
preset radio stations automatical-
ly.