What To Do If - Electrolux EOB98000U User Manual

70 electrolux what to do if ...

What to do if ...

Problem
The oven is not heating up The oven has not been switched
The oven lighting is not op-
erating
"F11" appears in the clock
display.
A fault code that is not list-
ed above appears in the
clock display
If you are unable to remedy the
problem by following the above
suggestions, please contact your
dealer or the Customer Care De-
partment.
Warning! Repairs to the appliance
are only to be carried out by quali-
fied service engineers. Considera-
ble danger to the user may result
from improper repairs.
Possible cause
on
The required settings have not
been set
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faulty
The meat probe has short
circuited or the plug of the meat
probe is not firmly in position in
the socket
Electronic fault
Switch oven on
Check the settings
Check fuse. If the fuses trip sev-
eral times, please call a qualified
electrician
Replace oven light bulb
Insert the meat probe plug into
the socket on the oven side wall
as far as it will go
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment
If the appliance has been wrongly
operated, the visit from the custom-
er service technician or dealer may
not take place free of charge, even
during the warranty period.
Advice on cookers with metal
fronts:
Because of the cold surface at the
front of the cooker, opening the
oven door during (or just after) bak-
ing or roasting may cause the glass
to steam up.
Remedy