Table of Contents
Advertisement
Specification
3.
Hardware Installation
The installation of USB2.0 Combo drive is fast and easy. Please follow these instructions
described below:
3.1.
System Requirements
A PC system with the following features is highly recommended for ensuring a stable
USB2.0 Combo performance.
CPU: Pentium II, Celeron 400 MHz or higher
Operating System: Windows 98SE/ME/2000/XP
Memory: 64MB recommended
Writing Software:
The drive requires CD writing software to write onto a CD-R/RW disc. When
you use the CD writing software, make sure that it supports this drive.
Hard Drive Space:
When writing to a CD-R/RW disc, you will need a working area (200 MB free
space) on the hard drive. When creating an image file for all data to write to a
CD-R/RW disc, in addition to the working area, you will need as much hard
drive space as that data (up to 1GB in total). However, such hard drive space
for the image file is not needed when you are directly writing from a hard drive,
CD-ROM drive or so on (on-the-fly writing).
USB2.0 Host controller card (Please be informed that you do not need to own
one if your motherboard is equipped with an USB 2.0 controller on it.)
USB2.0 certified cable (Included)
3.2.
Hardware Instruction
Front Panel
Emergency Eject Hole
Headphone Jack
Volume Control
Disc Tray
Play/ Next Button
-- E-5 --
Busy Indicator LED
Eject Button
English
Advertisement
Table of Contents
