Table of Contents
Advertisement
Specification
4.
Software Installation
4.1.
Before You Start
Please understand that CD recording is a non-interruptible process. Therefore, a stable
recording environment is a must. If you have a HDD set up only for CD recording
purpose, the recording process shall be smooth.
However, if an extra HDD is not available, you might prefer carrying out the following
steps to optimize your Windows 98SE / ME / 2000 / XP recording arrangement:
Close all resident programs that include Anti-Virus, Screen Saver, System
Agent, Power Management, etc. Turn off Auto Insert Notification. Further,
maximizing and minimizing windows are not recommended either. If not, any
operation of these applications will intrude the CD recording process and
damage your disk.
Defrag your HDD before any CD recording. This is particularly important when
you write files to CD from HDD. Defragment of HDD reallocates all the files so
that these relevant files are placed in the nearby clusters. This saves time and
risks when Easy CD Creator is trying to search for the files you want to record
on CD.
4.2.
Installing Software
For information on installing procedures and how to use the authoring software, please
refer to the manual that came with it. If you want to use another type of authoring
software not bundled with this COMBO drive, please refer to each manual on how to
install and operate. Please note that some authoring software or version of authoring
software does not support this COMBO drive.
-- E-11 --
English
Advertisement
Table of Contents
