Electrolux WA L4 E 101 User Manual page 8

8 electrolux
When these buttons are pressed, the corre-
sponding pilot lights come on. When they are
pressed again, the pilot lights go out.
If an incorrect option is selected, the in yellow
pilot light of the button 7 blinks for 3 times
and the Err message appears on the display
for some seconds.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the SPIN speed or the RINSE
HOLD option (Button 2)
When the required programme has been se-
lected, your appliance automatically propo-
ses the maximum spin speed provided for
that programme.
Press this button repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the washing machine.
The relevant light will light up.
RINSE HOLD: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. When the
programme has finished the display shows a
blinking , the pilot light 8.2 goes on, the
pilot light of button 7 is off and the door is
blocked to indicate that the water must be
emptied out.
To empty the water out please read
chapter «At the end of the programme».
Select the PREWASH option (Button 3)
Select this option if you wish your laundry to
be prewashed at 30°C before the main wash.
The Prewash ends with a short spin in pro-
grammes for cotton and synthetic fabrics,
whereas in the programmes for delicate fab-
rics the water is only drained.
The relevant light will light up.
Select the STAIN option (Button 4)
Select this option to treat heavily soiled or
stained laundry with stain remover (extended
main wash with time optimized stain action
phase). The relevant light will light up.
This option is not available with a tempera-
ture lower than 40°C.
If you wish to perform a programme with the
stain option, pour stain remover into the ap-
propriate compartment .
Select the TIME SAVING option (Button
5)
This option allows you to modify the washing
time, automatically proposed by the appli-
ance.
By pressing this button you can select the
following options:
DAILY: by pressing button 5 once, the rela-
tive pilot light comes on and the washing du-
ration will be reduced to wash daily soiled
laundry.
SUPER QUICK: by pressing button 5 twice,
the relative pilot light remains lit, the washing
duration will be reduced to wash lightly soiled
laundry or items that have been used or worn
for a short time. On the display will be visual-
ized the decreased washing time.
Select an additional rinse (EXTRA
RINSE)
This appliance is designed for saving water.
However, for people with a very delicate skin
(allergic to detergents) it may be necessary
to rinse the laundry using an extra quantity of
water.
Press simultaneously buttons 2 and 3 for
some seconds: the pilot light 8.3 comes on.
This function stays permanently on. To re-
move it press the same buttons again until
the pilot light 8.3 goes off.
Select the START/PAUSE (Button 7)
To start the selected programme, press the
button 7 , the corresponding red pilot light
stops blinking.
The pilot light 8.1 is on to indicate that the
appliance starts operating.
The pilot light 8.2 is on to indicate the door is
locked.
To interrupt a programme which is running,
press the button 7 : the corresponding red
pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 7
again.
If an incorrect option is selected, the yellow
pilot light of the button 7 blinks for 3 times the
message Err is displayed for about 2 sec-
onds.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out. Before you