Setting The Delay Start - AEG FAVORIT 88080 Vi User Information

Aborting the rinsing cycle
1. Press the RESET key combination.
On the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The cycle is stopped. On the display: CHOOSE CYCLE
3. If you want to start a new cycle, check whether there is any detergent
in the dispenser.
3
Turning off the dishwasher will only interrupt a selected dishwashing
cycle, not cancel it. The cycle will recommence after turning the dish-
washer back on again.

Setting the delay start

3
With the delay start you can delay the start of a dishwashing cycle for
between 1 and 19 hours. First of all set the delay start and then the de-
sired dishwashing cycle.
1. Go to the DELAY START option; see section "Adapting an option/set-
ting".
2. Set the period by which you wish to delay the start in hours.
In the symbol line of the display
3. Press the OPTION button, to change to the Programmes menu.
4. Select programme and start.
First of all the pre-set time delay until the start runs down. In the dis-
play you see the time remaining until the start of the dishwashing cy-
cle. After the time delay until the start has elapsed, the dishwashing
cycle starts automatically, the symbol
Cancel delay start:
You can cancel a time-delay in progress at any time.
1. Press the RESET key combination.
On the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The delay start is cancelled. The set rinsing cycle will begin.
.
goes out.
31