Cancelling The Drying Phase; Setting The Delay Start; Switching The Buzzer Off - AEG Favorit 45250Vi Instruction Booklet

en ru AEG F45250Vi 2-11-01 15.05
Instruction book

Cancelling the drying phase

In case you do not want to wait until the drying phase is completed, you
can cancel it by open the door. The drying phase is now cancelled.

Setting the delay start

The programme start can be delayed by 3, 6 or 9 hours.
1. Press in the On/Off button.
2. Press the delay start button repeatedly, until the lamp next to the
required hours of delay is lit.
3. Press the button for the required programme.
4. After the set delayed start time has elapsed, the programme starts.
Reset the delayed start:
If the programme has not started, you can change the set time with the
delay start button.
Cancelling the delayed start:
If the programme has not started, the delayed start can be cancelled. Press
the delay start button repeatedly, until none of the lamps next to the hours
are lit. The required programme starts immediately.

Switching the buzzer off

Before switching the buzzer off must all programmes have completed.
1. Press in the On/Off button.
2. Press the "Reset" buttons simultaneously and hold them pressed
in. When the first three programme indicator lamps starts to flash,
you can let go of the buttons.
3. Press the buzzer button once. The lamp for the buzzer button
starts to flash and the lamp for the ended programme cycle is lit.
Press the button once more and the lamp for the ended programme
cycle goes out. Now the buzzer is off.
4. Press out the On/Off button to complete the setting.
To reset the function, follow steps 1 and 2 above and then press
the buzzer button twice, until the lamp for the ended programme
cycle is lit again.
18
Sidan 18