Minolta Di152 User Manual page 150

9
Symptom
The copy has lines.
The copy has dark specks or
spots.
The edge of the copy is dirty.
9-2
Possible Cause
The Original Glass surface is
dirty.
The Original Pad is dirty.
The original is highly
transparent.
The original is 2-sided.
The Original Pad is dirty.
You have selected paper of a
size larger than the original
(when the zoom ratio is full
size).
The original is not placed in
the correct position (when
the zoom ratio is full size).
The reduction ratio selected
is not in accord with the
paper size (when the copy is
made at a manually adjusted
reduction ratio).
Troubleshooting Tips
Action
Wipe the Original Glass
clean with a soft dry cloth.
(p.10-5)
Wipe the Original Pad clean
with a soft cloth dampened
with neutral detergent.
(p.10-5)
Place a blank sheet of paper
over the original. (p.4-8)
The information on the
backside of a 2-sided, thin
original may be slightly
reproduced on the copy.
Adjust the image density to
the lighter side. (p.5-16)
Wipe the Original Pad clean
with a soft cloth dampened
with neutral detergent.
(p.10-5)
Select the same paper size
as the original. (p.5-4)
Or, use Auto Size to enlarge
the copy to the appropriate
size. (p.5-12)
Select the same paper size
as the original. Or, reload
the paper in the same
direction as the original.
Select the zoom ratio
according to the paper size.
(p.5-13) Or, use Auto Size to
reduce the copy to the
appropriate size. (p.5-12)
Di152/Di183