Volvo XC 60 Owner's Manual page 87

Stalk switch and knob for headlamp control in
AUTO position.
The function can start while driving in the
dark when the car's speed is 20 km/h or
higher.
Activate/deactivate AHB by moving the left-
hand stalk switch towards the steering wheel
to the end position and then releasing. Deac-
tivation when main beam is on means that the
lights are reset directly to dipped beam.
Car with analogue combined instrument
panel
When AHB is activated the
minates in the instrument's information dis-
play.
When main beam is switched on the
symbol also illuminates in the combined
instrument panel. This also applies for Xenon
headlamps if the main beam is partially
dimmed, i.e. as soon as the light beam shines
with slightly more than dipped beam.
Car with digital combined instrument panel
When AHB is activated the
turns white in the instrument's information
display.
When main beam is activated, the symbol
shines blue. This also applies for Xenon head-
lamps if the main beam is partially dimmed,
i.e. as soon as the light beam shines with
slightly more than dipped beam.
Manual operation
NOTE
Keep the windscreen surface in front of the
camera sensor free from ice, snow, mist
and dirt.
Do not stick or attach anything to the
windscreen in front of the camera sensor
as this may reduce effectiveness or cause
one or more of the systems dependent on
the camera to stop working.
symbol illu- If the message
Temporary unavailable Switch manually
shown in the combined instrument panel's
information display then you have to switch
manually between main and dipped beam.
However, the knob for headlamp control can
still remain in position
applies if the message
03 Instruments and controls
symbol
Active main beam
is
. The same
Windscreen sensors
blocked See manual
and the
are shown. The symbol goes out when
these messages are shown.
AHB may be temporarily unavailable e.g. in
situations with dense fog or heavy rain. When
AHB becomes available again, or the wind-
screen sensors are no longer blocked, the
message extinguishes and the
illuminates.
WARNING
AHB is an aid for using optimum light
composition when conditions are favoura-
ble.
The driver always bears responsibility for
manually switching between main and
dipped beam when traffic situations or
weather conditions so require.
symbol
symbol
03
}}
85