Volvo XC 60 Owner's Manual page 82

03 Instruments and controls
||
Overview, light switches
03
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting as well as ambient
lighting*
Button for rear fog lamp
Knob for daytime running lights and park-
ing lamps
20
Thumbwheel for headlamp levelling
Knob positions
NOTE
The same lamps are used for daytime run-
ning lights and position/parking lamps
front. The brightness is higher when the
lamps are used as daytime running lights.
Not available for cars equipped with active Xenon headlamps*.
20
*
80
Option/accessory, for more information, see Introduction.
Posi- Specification
tion
Daytime running lights
the car's electrical system is in
key position II or the engine is
running.
Main beam flash can be used.
Daytime running lights, side
marker lamps front and posi-
tion/parking lamps/side marker
lamps rear when the car's elec-
trical system is in key position II
or the engine is running.
Automatic switching to posi-
tion/parking lamps/side marker
lamps when the car is parked.
Main beam flash can be used.
Posi- Specification
tion
Daytime running lights, side
A
when
marker lamps front and posi-
tion/parking lamps/side marker
lamps rear during the day when
the car's electrical system is in
key position II or the engine is
running.
Automatic switching to dipped
beam and position/parking
lamps/side marker lamps in
poor light conditions or when
the windscreen wipers or rear
fog lamps are activated.
The tunnel detection (p. 83)*
function is activated.
The active high beam (p. 84)*
function can be used.
Main beam can be activated
when dipped beam is switched
on.
Main beam flash can be used.