Table of Contents
Advertisement
46
Cleaning and Care
2. From above, insert the door glass at an angle
into the door profile at the bottom edge of the
door and lower it.
3. Take hold of the door trim (B) at each side, posi-
tion it on the inside edge of the door and push
the door trim (B) onto the upper edge of the
door.
On the open side of the door trim (B) there is a
guide bar (C). This must be pushed between the
outer door panel and the guide rail (D).
The clip seal (E) must be snapped in.
4. Open the oven door as far as it will go.
Advertisement
Table of Contents
