Table of Contents
Advertisement
3. Close the oven door as far as the first position
(approx. 45°).
4. Take hold of the door trim (B) on the upper
edge of the door at both sides and press in-
wards to release the clip seal. Then remove the
door trim by pulling upwards.
5. Hold the upper edge of the door glass and take
it out of the guide by pulling it upwards.
6. Tip the water collecting channel towards the
door glass and lift upwards to remove from the
guide.
Cleaning the door glass and the water collecting channel
Clean the door glass panels and the water collecting channel thoroughly with a solution
of water and washing-up liquid. Then dry them carefully.
Inserting door glass panels and the water collecting channel
1. Insert the snap-in hook of the water collecting
channel sideways into the guide. Apply some
pressure from above to snap in hook on the
other side.
Cleaning and Care
45
Advertisement
Table of Contents
