Helmet Holder - Yamaha MidnightStar XV1900A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Projection
2. Seat holder
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
NOTE:
Make sure that the seat is properly se-
cured before riding.

Helmet holder

1. Helmet holder
2. Helmet holding cable
The helmet holder is located under the
rider seat. A helmet holding cable is
provided beside the owner's tool kit to
secure a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-15.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
3-16
EAU38341
1. Helmet holding cable
2. Helmet
3. Place the helmet on the left side of
the vehicle, and then install the rid-
er seat.
CAUTION:
Be sure to place the helmet on the
left side of the vehicle. Some hel-
mets may contact the muffler when
placed on the right side because of
their size or shape.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
ECA15330
EWA10160