Fuel tank breather hose
1. Fuel tank breather hose
Before operating the motorcycle:
G
Check the fuel tank breather hose
connection.
G
Check the fuel tank breather hose
for cracks or damage, and replace
it if damaged.
G
Make sure that the fuel tank
breather hose is not blocked, and
clean it if necessary.
INSTRUMENT AND CONTROL FUNCTIONS
EAU13412
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. Make sure that the exhaust
system has cooled down before do-
ing any maintenance work.
CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
G
Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
G
Do not allow the engine to idle
too long.
EAU13431
Rider seat
To remove the rider seat
1. Insert the key into the seat lock,
EWA10860
ECA10700
1. Seat lock
2. Unlock.
2. While holding the key in that posi-
To install the rider seat
1. Insert the projection on the rear of
3-15
and then turn it counterclockwise.
tion, lift the front of the seat up, and
then pull the seat off.
the seat into the seat holder as
shown.
EAU34042
3