Handlebar Switches - Yamaha Star XVS95B Owner's Manual

To set the brightness
1. Turn the key to "OFF".
2. Push and hold the "SELECT"
switch.
3. Turn the key to "ON", and then re-
lease the "SELECT" switch after
five seconds.
4. Adjust the multi-function meter unit
panel brightness level by pushing
the "SELECT" switch.
5. Push the "RESET" switch.
The odometer/tripmeter/clock dis-
play will return to the prior mode.
INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
1
2
3
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
4-6
EAU12348 Right
1. Engine stop switch "
2. "SELECT" switch
3. "RESET" switch
4. Start switch " "
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
1
2
3
4
4
/ "
EAU12400
/ "
" for the high
EAU12430
/ "
". When re-