Handlebar Switches - Yamaha TW200E Owner's Manual

1
2 3
1. Dimmer switch "LIGHTS"
2. Turn signal switch "TURN"
3. Horn switch "HORN"

Handlebar switches

Dimmer switch "LIGHTS"
Turn the switch to "HI" for the high
beam and to "LO" for the low
beam.
Turn signal switch "TURN"
This is a three-position switch. The
center position is off.
Turn to "L" to turn on the left
flasher, and to "R" for the right
flasher. Be sure to turn the switch
off after completing a turn.
INSTRUMENT AND CONTROL FUNCTIONS
Horn switch "HORN"
Press the switch to sound the horn.
EAU00118
EAU00122
EAU00128
EAU00130
1. Engine stop switch "ENGINE STOP"
2. Start switch "START"
Engine
STOP"
The engine stop switch is a safety
device for use in an emergency
such as when the motorcycle over-
turns or if trouble occurs in the
throttle system. Turn the switch to
"RUN" to start the engine. In case
of emergency, turn the switch to
"OFF" to stop the engine.
3-3
1
2
EAU00137
stop switch "ENGINE
1
2
3
4
5
6
7
8
9