Rear Shock Absorber; Rear Carrier; Sidestand - Yamaha TW200E Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Rear shock absorber

w
1
This shock absorber contains high-
ly pressurized nitrogen gas. Read
2
and understand
information before handling the
3
shock absorber. The manufacturer
cannot be held responsible for
4
property damage
injury that may
5
improper handling.
1. Do not tamper
attempt to open the cylinder
6
assembly.
2. Do not subject the shock
7
absorber to an open flame or
other high heat source. This
8
may cause the unit to explode
due to excessive gas pressure.
9
3. Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
4. Take your shock absorber to a
Yamaha dealer for any service.
EAU01343
EAU00315
the following

1. Rear carrier

or personal
Rear carrier
result from
with or
w
Do not exceed the load limit of 3
kg.

Sidestand

1
This model is equipped with an
ignition circuit cut-off system. The
motorcycle must not be ridden
when the sidestand is down. The
sidestand is located on the left side
of the frame. (Refer to page 5-1 for
an explanation of this system.)
EAU00320
EW000032
3-10
EAU00330