Yamaha TDM900 Owner's Manual page 29

1. Damping force adjusting screw
Damping force
1. Turn the adjusting screw on each
fork leg in direction a until the
screw moves almost a 1/2 turn
without clicking.
2. Continue turning the adjusting
screw in direction a until it clicks.
This is the minimum setting.
INSTRUMENT AND CONTROL FUNCTIONS
3. To increase the damping force,
continue turning the adjusting
screw in direction a. The third
click after the minimum setting is
the maximum setting. If the adjust-
ing screw is turned further in direc-
tion a, it will move half a turn
before returning to the minimum
setting.
NOTE:
_
Make sure that the adjusting screw is
turned to one of the four settings.
_
CI-01E
Minimum (soft) Standard
Setting 1 2 3
3-14
Maximum
(hard)
4
3