Rear Wheel - Yamaha FZS1000 Owner's Manual

7. Push down hard on the handlebar
several times to check for proper
fork operation.
PERIODIC MAINTENANCE AND MINOR REPAIR

Rear wheel

To remove the rear wheel
WARNING
G It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut and the brake
caliper bolts.
1. Axle nut
2. Place the motorcycle on the cen-
terstand.
6-36
EAU25080 3. Disconnect the brake torque rod
from the brake caliper by removing
the nut and the bolt.
EAU25201
EWA10820
1. Brake caliper bolt
2. Brake torque rod
3. Brake torque rod bolt
4. Brake torque rod nut
5. Brake caliper bracket
4. Remove the axle nut, then the
brake caliper by removing the
bolts.
CAUTION:
Do not apply the brake after the
brake caliper has been removed,
otherwise the brake pads will be
forced shut.
5. Loosen the locknut on each side of
the swingarm.
6
ECA11300