To Recall A Performance - Casio XW-G1 User Manual

Using the Performance Mode
7
3.
Press EDIT.
This will display the top screen of the performance editing list.
4.
Select items and change settings on the screen using the same procedures as those used when
selecting a tone.
• For details about editing, see "Editable Performance Parameter List" on page E-73.
5.
After you finish with your edits, press
This exits the editing list.
7
6.
Press WRITE and then save your edited performance as a user performance.
• For information about how to save user data, see the procedure for saving user tone data (page E-12).
■ Saving User Performance Data to an External Device
• Memory card (page E-86)
• Computer (page E-92)

To recall a performance

7
1.
Press PERFORM.
The button will light and the Synthesizer will enter the Performance Mode.
2.
Select a performance bank and number using the same procedure as that for selecting an arpeggio
(page E-40).
This will recall the contents of the performance you selected.
• Recalled performance contents are the same as those described in "Editable Performance Parameter List" in the next
section of this manual.
• Here you can configure a performance filter to omit certain settings (Sequencer, arpeggio, etc.) contained in recalled
performance data. Press
the group and configure performance filer settings.
Performance Filter Setting List
Display
PrfrmFilter >Ent
Step Seq
Arpeggio
Phrase
Tempo
Sys Rev
Sys Cho
E-72
7
br
MENU to display the performance menu. Next, select "PrfrmFilter >Ent" shown below to enter
Performance filter
Step Sequencer on/off. Turning on this setting filters out Step Sequencer items contained in the
Sequencer Parameter group of the Editable Performance Parameter List (page E-73).
Arpeggio on/off. Turning on this setting filters out Arpeggio items contained in the Sequencer
Parameter group of the Editable Performance Parameter List (page E-73).
Phrase on/off. Turning on this setting filters out Phrase Sequencer items contained in the
Sequencer Parameter group of the Editable Performance Parameter List (page E-73).
Tempo on/off. Turning on this setting filters out Tempo settings contained in the Sequencer
Parameter group of the Editable Performance Parameter List (page E-73).
System reverb. Turning on this setting filters out reverb items contained in the Effect Parameter
group of the Editable Performance Parameter List (page E-73).
System chorus. Turning on this setting filters out chorus items contained in the Effect Parameter
group of the Editable Performance Parameter List (page E-73).
Zone 1 to 4 on/off and keyboard range settings
EDIT.
Description Settings
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On