Table of Contents
Advertisement
■ Editable Parameters of Blocks (1) through (6)
5
• The nine sliders (
) and four knobs (
below (page
).
E-34
Preparation
Perform the following steps from the screen in step 2 of the procedure under "To edit and save a tone as a user tone" on page
E-20.
1.
Select "OSC Block >Ent" and then press
2.
9
Use the
PART minus (–) and plus (+) buttons to select the block you want to edit.
Editable Parameter List
• Shaded cells indicate a group made up of multiple items. Press
• (V) at the end of a display item indicates an item that can be selected as a Block (10) virtual controller destination (page E-29).
Display Text
OSC On Off
Oscillator >Ent (Block (1) to (5) only)
Synth Wave
(Blocks (1) and (2) only)
PCM Wave
(Blocks (3) and (4) only)
Pitch (V)
Detune (V)
KeyFollow (V)
3
) can be used for quick and easy adjustment of some of the parameters in the list
br
ENTER to enter the group.
Block
Syn1: Synth OSC1
Syn2: Synth OSC2
PCM1: PCM OSC1
PCM2: PCM OSC2
Ext: External input
Noise: Noise
OSC on/off. Selecting off disables the entire block.
Oscillator. Group of editable parameters associated with the pitch of the synth
OSC, PCM OSC, and pitch shift.
• This group can be entered by performing step 1 under "To edit and save a tone
as a user tone" (page E-20) and then holding down
Synth wave, PCM wave. Selects the base wave for a sound generated by the
synth OSC or PCM OSC.
• A wave whose name is displayed with "L" or "B" next to it will sound at a pitch
that is one octave lower than the actual pitch. In the case of a "B" wave, nothing
will sound when a keyboard key higher than C5 is pressed.
• See the separate "Appendix" for details about wave types.
• This item is not present in Block (5).
• The splits of a user wave tone (User Wave) can be assigned as PCM waves.
User wave names consist of the text "UserWave", followed by two number
separated by a hyphen (such as: UserWave 1-2). The number to the left of the
hyphen (1 in the example), is a user number from 1 to 10 or the letter R
(sample looper recorded data). The number to the right of the hyphen (2 in the
example), is a split number from 1 to 5. If the data includes a wave, an asterisk
(*) is appended to the beginning of the user wave name.
Pitch. Adjusts the maximum and minimum pitch values within a range of ±2
octaves. A setting of –256 lowers the pitch two octaves, while a setting of 255
raises the pitch two octaves.
Detune. Fine adjustment of the tuning.
Key follow. Adjusts the amount of pitch change between neighboring keyboard
keys. A higher value represents greater change.
Example: When Key Follow Base is keyboard key C4
Key Follow Base
Selecting and Creating Tones
br
ENTER to display the items that make up a group.
Description
7
EDIT.
Key Follow = 127
Key Follow = 64
D
4
C #
4
Key Follow = 0
C
4
B b
4
Key Follow
Key Follow = -127
C #
C
4
4
Settings
Off, On
See the separate
"Appendix".
–256 to 0 to +255
–256 to 0 to +255
–128 to 0 to +127
E-23
Advertisement
Table of Contents
