Table of Contents
Advertisement
■ Step Sequencer Parameters
Level 1
Level 2
Trk On/Off >Ent
Pattern
Part
Track
Step Edit >Ent
Drm1 to 5,
Bass,
Sol1 and 2
Chrd
Ctl1 to 4
Level 3
Track editing (track on/off)
7
• Pressing
display the same screen as Trk On/Off >Ent.
Pattern number
Part name.
Track on/off. Use
4
•
1 to 4 correspond respectively to Control Parts 1
through 4. In the same way,
Note Parts (page E-51).
Step editing. Step-specific editing group.
NOTE, VELO Selects off (OFF), on (NOTE), or tie (TIE) for a step. When
on, note (NOTE) and velocity (VELOCITY) parameter
settings are configured. The tie setting cannot be selected
for Step 1.
NOTE, VELO Selects off (OFF), on (NOTE), or tie (TIE) for a step. When
on, note (NOTE) and velocity (VELOCITY) parameter
settings are configured. The tie setting cannot be selected
for Step 1.
Control part (Ctl) effects. Data of each part.
BEND
Pitch Bender
CC1 to 97
MIDI control change.
K1 to 4
Knob operations specified by a Performance, etc.
TEMPO
Tempo
PHRASE
Specifies triggers for starting and stopping Phrase
Sequencer playback. Display for Control 4 (Ctl4) only.
Description
EDIT while in the Step Sequencer Mode will
4
1 to 16 to toggle.
4
8 to 16 correspond to
Using the Step Sequencer
Setting Range and
Screen Contents
1 to 8
Drm1 to 5, Bass, Sol1 to 2, Chrd,
Ctl1 to 4
Off, On
Off, (When on) NOTE: C- to G9*,
(When on) VELO: 1 to 127, Tie
Note
Off, (When on) NOTE: Off or C- to
G9*, (When on) VELO: 1 to 127, Tie
Notes of chord
NOP: No operation. Other setting
ranges are as shown below.
Example screen shot below shows
PHRASE screen.
Menu
–128 to +127
0 to 127, Pan only –64 to +63
0 to 127
30 to 255
Nop: Disabled, Stop: Stop playback,
Start: Start playback,
–24 to +24: Shift from original key
(When Start is selected)
Velocity
Velocity
Value
E-57
Advertisement
Table of Contents
