AOpen CRW5232 User Manual page 10

Atapi/e-ide internal model
Table of Contents

Advertisement

Specification
Don't use force to pull out or push in the disc tray. This might cause
damage to the loading section of the drive.
Disc Tray
This is the tray for the disc. Place the disc on the ejected disc tray, and then
slightly push the tray (or push the eject button), the CD will be loaded.
Eject Button
This is the button used to eject or bring in the disc tray.
Busy Indicator
When the disc tray or disc is being accessed, the light shines or flashes orange.
Even when a disc is loaded or a disc is not being accessed, the light goes out.
When an illegal disc is loaded or some hardware trouble occurs, the indicators
blinks.
Headphone Jack
This jack is for connecting headphones or mini-speakers.
Volume Control
This is used to adjust the output volume of the headphone jack. It can't be used
to adjust the output volume for the audio output connectors on the rear panel.
Emergency Eject Hole
When the drive cannot eject the disc tray because of power failure, pushing the
emergency eject hole of the front panel by the thin pole make drive be able to
eject the disc tray.
This function is only for emergency case. Do not use this function in
usual case to prevent from mechanical damage.
-- E-6 --

Advertisement

Table of Contents
loading

Table of Contents