Water Drain Hose - AEG Favorit 88025 VI User Manual

Aeg dishwasher favorit 88025 vi
Table of Contents

Advertisement

32
Water connection
WARNING!
Dangerous voltage
In order to pass the safety valve through the kitchen cabinets, an opening of at least 45mm
x 90mm is needed.

Water drain hose

Use the supplied hose clamp to connect the water drain hose to the sink.
The highest point of the drain hose must be no more than 60 cm from the floor and must
have a continuous fall to the plumbing connection.
The drain hose can be lengthened using additional lengths and connectors. These must be
purchased from Electrolux Spare Parts. The extension length must not exceed 2 metres.
The drain hose must be free of kinks and obstructions.
Remove the sink plug when the appliance drains the water to prevent that the water goes
back into the appliance.
If you connect the water drain hose to a trap spi-
got under the sink, remove the plastic membrane.
If you do not remove the membrane, remaining
food can cause a blockage in the drain hose spigot
The appliance has a security feature to prevent
dirty water going back into the appliance. If, the
spigot of the sink has a 'non-return valve', this
valve can cause the appliance to drain incorrectly.
Remove the non-return valve.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents