Select And Start A Washing Program; Select And Start A Washing Program With Delay Start; Cancelling Delay Start - AEG Favorit 88025 VI User Manual

20

Select and start a washing program

To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid dispenser.
3. Adjust the water hardness setting to the highest level.
4. Do a washing program without dishes.
5. Adjust the water softener to the water hardness in your area.
6. Adjust the rinse aid dosage.
Select and start a washing program
Set the options before the start of a washing program. When a washing program starts no
options can be set. If it is necessary to set an option, cancel the operating washing program.
Set the washing program with the door ajar. The washing program only starts after you
close the door. Until then it is possible to modify the settings.
Follow these steps to set and start a washing program:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Set a washing programme.
– The digital display shows the program number. Refer to the 'Washing programs' chart
for program details.
4. Close the door.
– The washing program starts.
When the washing program operates, you cannot change the program. Cancel the washing
program. Refer to 'Cancelling a washing program'.

Select and start a washing program with delay start

1. Press the on/off button.
2. Set a washing program.
3. Press the delay start button until the display shows the necessary delay start of the
washing program.
– The delay start indicator light comes on.
4. Close the door.
– The countdown of the delay start starts.
– When the countdown is completed, the washing program starts automatically.
If you open the door during the countdown, this will interrupt the countdown. When you
close the door again, the countdown continues from the point of interruption.

Cancelling delay start

1. Press and hold function buttons B and C until the lights of the program selection
buttons come on and the digital display shows two horizontal bars.
– When you cancel delay start, you also cancel the washing program.
2. Set a new washing program.