Table of Contents
Advertisement
8
Control panel
1)
Rinse aid
MULTITAB
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.
Cancel button
With this button you can cancel a washing programme or a delay start. Refer to 'Select and
start a washing programme'.
Programme selection buttons
With these buttons you can select the washing programme. Press one of the buttons again
and again until the indicator light of the necessary programme comes on.
Refer to 'Washing programmes' for more data about the washing programmes.
Extra silent programme button
This is a washing programme that operates with a low level of noise.
During the Extra Silent the pump works at a very low speed. This to decrease the level of
noise of 25% compared to the declaration programme. Because of this the programme has
a very long time duration.
Set this washing programme in times when the power rate is more economical.
Multitab button
Press this button to activate/deactivate the multitab function. Refer to 'Multitab function'.
Delay start button
Use this button to delay the start of the washing programme with an interval between 1
and 24 hours. Refer to 'Select and start a washing programme'.
Display
The display shows:
• The electronic adjustment of the level of the water softener.
• Activation/deactivation of the rinse aid dispenser (only with multitab function on).
• The washing programme duration.
• Remaining time to the end of the washing programme.
• The end of a washing programme. The display shows a zero.
• Remaining time to the end of the delay start.
• Fault codes.
Function buttons
Use the function buttons for these operations:
• To adjust electronically the level of the water softener. Refer to 'Setting the water soft-
ener'.
• To deactivate/activate the rinse aid dispenser when the multitab function is on. Refer to
'What to do if...'.
It comes on when it is necessary to fill the rinse aid container. Refer to 'Use of
detergent and rinse aid'.
It comes on when you activate the multitab function. Refer to 'Multitab func-
tion'.
Indicator lights
Advertisement
Table of Contents
