First Use; Daily Use - Electrolux ENA34399W User Manual

cery shopping, we suggest activating the
Shopping function to chill the products
more rapidly and to avoid warming the oth-
er food which is already in the refrigerator.
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The Shopping indicator flashes.
The fridge temperature indicator shows
the set temperature for a few seconds.
2. Press the OK button to confirm.
The Shopping indicator is shown.
The Shopping function shuts off automati-
cally after approximately 6 hours.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the Shop-
ping indicator flashes.
2. Press the OK button to confirm.
3. The Shopping indicator goes off.
4. The Eco Mode function is restored if it
has been previously selected.
Important! The function switches off by
selecting a different fridge set temperature.
Action Freeze function
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The Action Freeze indicator flashes.
The freezer temperature indicator shows
symbol for a few seconds.
2. Press the OK button to confirm.
The Action Freeze indicator is shown.
An animation starts.

FIRST USE

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.

DAILY USE

Storage of frozen food
When first starting-up or after a period out
of use, before putting the products in the
compartment let the appliance run at least
2 hours on the higher settings.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the Action
Freeze indicator flashes.
2. Press the OK button to confirm.
3. The Action Freeze indicator goes off.
4. The Eco Mode function is restored if it
has been previously selected.
Important! The function switches off by
selecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freez-
er compartment (for example due to a pow-
er failure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator shows
the highest temperature reached for a
few seconds. Then show again the set-
ted temperature.
4. The alarm indicator continue to flash un-
til the normal conditions are restored.
When the alarm has returned the alarm indi-
cator goes off.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
Important! In the event of accidental
defrosting, for example due to a power
failure, if the power has been off for longer
than the value shown in the technical
characteristics chart under "rising time", the
defrosted food must be consumed quickly
electrolux 7