Electrolux FM4360G-AN User Manual page 16

16 Installation Instructions
Safety instructions when connecting to the gas supply
Warning!
When installing, the appliance must not be connected to the electrical supply.
Disconnect the mains plug or switch off or take out the fuses. Shut off mains
gas supply.
• A stop tap must be built-in between the house's gas supply and the appliance.
• Before connecting the appliance, check whether the local connection condi-
tions (type of gas and gas pressure) match the appliance's set-up.
• The settings for this appliance are given on the appliance's rating plate.
• The present settings for the type of gas and gas pressure are given on a sticker
near the connection pipe.
• This appliance is not connected to an exhaust gas outlet. It must be connected
in accordance with the installation conditions that apply. Special attention is
to be paid to suitable ventilation.
Gas connection
• The 1/2'' gas connection pipe is located on the left-hand side of the back of
the appliance.
• Burner rail end piece with nut (1), gasket
(2) and adjustable fitting (3) are to be as-
sembled as illustrated.
• It is recommended that a gas safety
socket is used.
• The connection can be permanent or us-
ing a permitted gas safety hose assembly
with a socket.
• The hose assembly must be positioned
such that it is not in contact with any-
thing and must not come into contact
with a moveable part of the built-in unit
(e.g. drawer).
• The gas hob can be changed over to other types of gas. Conversion kits for
other gas types are available in specialist shops.